Zurück zu 200-301

CCNA 3 — ENSA · Modul 12 · Troubleshooting

R19#sh int fa0/0
FastEthernet0/0 is up, line protocol is up
  Hardware is DEC21140, address is ca02.7788.0000 (bia ca02.7788.0000)
  Description: SALES_SUBNET
  Internet address is 10.32.102.2/30
  MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
  reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (60 sec)
  Full-duplex, 100Mb/s, 100BaseTX/FX
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:01, output 00:00:00, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/300/0/0 (size/max/drops/flushes); Total output drops: 135298429
  Queueing strategy: fifo
  Output queue: 0/300 (size/max/drops/flushes)
  30 second input rate 0 bits/sec, 0 packets/sec
  30 second output rate 0 bits/sec, 0 packets/sec
  73310 packets input, 7101162 bytes
  Received 73115 broadcasts (0 IP multicasts)
  0 runts, 0 giants, 0 throttles
  0 input errors, 4 CRC, 0 frame, 0 overrun, 0 ignored
  0 watchdog
  0 input packets with dribble condition detected
  3927513096455 packets output, 14404034810952 bytes, 0 underruns
  0 output errors, 11 collisions, 0 interface resets
  0 unknown protocol drops
  0 babbles, 0 late collision, 0 deferred
  0 lost carrier, 0 no carrier
  0 output buffer failures, 0 output buffers swapped out

Beziehen Sie sich auf das Exhibit. Was ist die Ursache für die schlechte Leistung auf Router R19?

Antwort wählen

Zum Markieren bitte anmelden: Anmelden